can't get it to work when i connect it straight to anntanea the set up will not even appear

Asked by MaryAnn on 08/22/2008 6  Answers

ManualsOnline posted an answer 15 years, 7 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
4 cant believe i had to register to answer the question :/ Ok, to get back to normal, set the television to channel 3, turn on the DTV box, and hold down "setup" on the dtv remote for 3-5 seconds. this will override the "passthrough" option and bring back ur happiness.
Was this answer helpful?
4 i TRY TO SET UP UP THIS CONVERTER BOX. i WAS UNSUCCESFUL. i COULD NOT EVEN GET TO THE MENU. yES i FOLLOW THE OWNERS MANUAL. i HAD IT SET TO CH 3.i DID NOT COME WITH ANY AUDIO CORDS.i GET THE BOX TO TURN ON WITH REMOTE.i CAN GET ANY PICTURE BECAUSE i CANNOT GET TO MENU TO SCAN THE CHANNELS.i BOUGHT TWO BOXES.bUT DONT WANT TO OPEN THE OTHER ONE IN CASE i DECIDE TO REUTRN IT. mY TV ONLY ONE YEAR OLD.
Was this answer helpful?
3 i bought 2 tb11mw9 and during set up i selecte rf feedthough and now on both units will not come one when turned on.
Was this answer helpful?
3 The setup button is supposed to override the "RF Through" but on one of my units does not. Using RCA connectors solved the problem immediately. Then I was able to go back to the coax.
Was this answer helpful?
2 I found the menu will come back when the TV is connected to the audio/video connectors, but not the coax connector. This converter box seems like it was rushed to market and is frustrating to work with.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.