1. Manuals
  2. Kitchen Appliance Support
  3. Electrolux Support
  4. Dishwasher Support
Support User Manuals
Question About Electrolux Dishwasher None
We have model EIDW6305GS1A dishwasher, about 3 yea...

We have model EIDW6305GS1A dishwasher, about 3 years old, lost manual,. There is about inch of water remaining at bottom of washer after cycle finish. Works ok otherwise. What is problem?

Asked by Lem on 08/06/2013 2  Answers

ManualsOnline posted an answer 10 years, 8 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Chris posted an answer 10 years, 8 months ago

0 Hello lemwong, thank you for your post! The standing water could be related to a communication issue with the control or drain pump assembly issue. Most dishwashers have a glass trap located in the center of the filter designed to collect pieces of broken glass, straws, pits, etc. You should simply be able to grasp handle and left it out. Once you empty the filter you may wash it warm soapy water if you prefer and then rise and place it back. If the appliance makes a grinding noise then there is a possibility that the unit has a faulty drain motor. If the instructions above do not solve the problem, I am fairly confident that an authorized service agent will be able to restore your appliance to its normal operating condition. You can often locate a qualified service technician on the manufacturer website.
Was this answer helpful?

Carla posted an answer 10 years, 4 months ago

0 Hi, just had this problem myself. The cause was the drain tube had a blockage in it. I just loosened the clamp that hold the tube to the kitchen sink drain and dislodged some gunk....not a lot came out but now it works fine
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual