• Hello, I have the manual but it doesn't work
  
  
  Hello, I got the paper manual, I could give you numbers if you can help me... ha!. It's a joke, I'll give you the numbers anyway but I need help in return.
  Here the problem. On the manual sheet, it's said "Hold the code button then press the TV button, the red light will remain on..." but,... as soon as I put the three digit numbers, I don't even finish to put them and the remote stop the light to be red. I keep pushing the digit numbers anyway but, for sure, it doesn't work for all codes under the brand code of the TV. Just in case we're talking about the same Flip Remote Control, here the serial number: journey's edge Multimedia Remote Control frc-24/4604.
  
  
  Was this comment useful?


• remote manuel
  
  
  can you please copy me on the instruction sheet for this remote.
  
  thank you
  
  
  Was this comment useful?


• journey's edge Multimedia Remote Control frc-24/4604
  
  
  The remote RCU 800 appears to utilize the same codes as the Journey's Edge Flip Remote Model No FRC-24/4064.
  
  My remote only came with the first page, I used some of the codes from it to locate the RCU8000
  
  
  Member Provided Link
  
  
  
  Was this comment useful?


• directions are wrong
  
  
  In order to program codes you have to hold down the "code" button for 3 seconds and the red light comes on -- release the "code" button and the light stays on -- then quickly press and release the device button (TV, VCR\DVD,SAT or CABLE) and the light will flash once but will stay on. Now enter the 3 digit code, after entering the 3rd digit the light goes out without flashing 3 time quickly the code was accepted if it flashes before going out the code was not accepted.
  I hope this helps
  
  
  Was this comment useful?

Add Comment