Aiphone SBX-2BH TV Mount User Manual


 
- INSTRUCTIONS -
The SBX-2BH is a surface mount stainless steel enclosure designed for mounting two Aiphone 2-gang
devices horizontally. The SBX-2BV is a similar box used to mount the devices vertically. The enclosures
are weather resistant and include space for wiring inside. These boxes are designed for an intercom sub
station and HID-SS ProxPoint® Plus card reader to be mounted together in a uniform housing for a more
professional and aesthetically pleasing look.
Page 1
3
-
3
/
8
"
4
-
1
1
/
1
6
"
9
-
5
/
8
"
2
-
3
/
8
"
3
-
5
/
1
6
"
2
-
3
/
8
"
4-13/16"
9
-
5
/
8
"
SBX-2BH
SBX-2BV
INSTALLATION:
1. Mount SBX-2BH(V) to wall surface, or on two 1-gang boxes
or rings spaced apart by 4-¾”, center-to-center.
2. Connect supplied speed nuts to mounting ears (8 total).
3. Make wiring connections to devices to be installed in the box.
4. Mount devices to box using screws provided.
5. Remove protective plastic film from the unit.
Mounting
Ears
Mounting Ears
SAMPLE:
HID-SS and LE-SS mounted in SBX-2BH
NOTE: These are not 4-gang surface mount enclosures, but are
enclosures for two separate 2-gang units. The intended use is for
mounting an intercom sub station and a card reader in the same
uniform housing.