Filter
Top Products
ENGLISH
Press SET/TRACKING + or – to select ONCE,
DAILY or WEEKLY.
To record
a single program
daily program
weekly program such as every
Monday (WKL-MON)
Press ENTER.
• The following timer information appears on the
screen.
• If you want to change the setting here, see
“Changing the setting.”
Press ENTER repeatedly until the tape speed
flashes, then press SET/TRACKING + or – to
select SP, LP or SLP.
Press VCR PLUS+ button or ENTER.
The timer program list appears.
Press MENU twice to return to the normal
screen.
Press T-REC.
• The TIMER REC indicator on the unit lights, and the
unit stands by for timer recording.
• If the TIMER REC indicator does not light, a cassette is
not inserted.
• The cassette is ejected if the cassette’s erasure
prevention tab has been removed.
• You can turn the unit off. The unit automatically starts
recording at the programmed time.
Caution
When the TIMER REC indicator on the unit lights, the
tape functions are not operable. To operate the others,
press T-REC. However, remember to press it again to
activate timer recordings.
3
Select
ONCE
DAILY
WEEKLY
5
6
7
4
8
26
To cancel a program
Press MENU. And press SET/TRACKING + or – to select
TIMER REC SET in the menu. Then press
SET/TRACKING + or – to select the unnecessary program,
and press CANCEL.
If the program overlaps another
The overlapped portions will be deleted. The program listed
first on the timer program setting screen has priority over
the succeeding program as illustrated.
To cancel the On-Timer or Off-Timer
To avoid having the On-Timer or Off-Timer working during
the program time, press the VCR PLUS+ button after step
6. The ON/OFF TIMER menu will appear on the screen.
Then refer to “Setting the On-Timer” or “Setting the Off-
Timer.”
Tips
• If “PROGRAM FULL” flashes and the timer program list on
step 1, 8 programs are already set. Cancel an unnecessary
program.
• To confirm the setting, select TIMER REC SET in the menu
to display the timer program list. Press MENU twice to return
to the normal screen.
• When the power supply is interrupted for more than 5
seconds, the preset program is cleared. In this case, you
have to set the clock and the timer again.
Note
During timer recording, when the tape reaches the end, the
TIMER REC indicator on the unit flashes.
Changing the setting
To set the daily program
In step 4, press SET/TRACKING + or – repeatedly to
display the desired daily program as follow:
MON-FRI : Monday to Friday
MON-SAT : Monday to Saturday
SUN - SAT : Everyday
To extend the recording time
After step 4, press ENTER repeatedly until the end time
flashes, then press SET/TRACKING + or – to change the
setting.