Filter
Top Products
Rev 1.5 Page 3
3. Usage
3.1 The player
When you turn the player on, the script reader starts up automatically after about 30
seconds. You must verify beforehand that the disk is indeed plugged in and that the key
locking is activated.
The order of the script reading and the description of the interaction with external
modules are programmed in the script named SC00 and possibly in the sub-script files (SC01,
SC02 …).
3.1.1 Script file
The script files are basic programmes describing, with simple commands, the order in
which the video clips are played. External actions that may occur, possibly the time between
actions and/or the clips, loops it and calls on another sub-script.
They are written in simple text file.
You can edit them directly in the HTML interface (see script construction page) of the mp615
reader, or on your local computer with any text editor. You should name them SC00 without
any extensions and upload the script created in the player using an FTP service or a network
explorer.
3.1.2 Videos
The video clips must be in MPEG-1 (system) or MPEG-2 (program) format
3.1.3 File transfer
The file transfer is performed either by network link using drop and drag with your operating
system or with FTP transfer software.
File transfer is carried out using any FTP software.
See documentation concerning Web interface (network)
File transfer can also be done using the mobile rack via another computer recognising the hard
disk sharing format: FAT32.
Please consult us should you wish to acquire female mobile rack.