Audiovox ADV200S DVD Player User Manual


 
128-7252A
17 of 35
-17-
Wired Headphones
There are two 1/8” headphone jacks on the ADV200 that can be used with any standard wired stereo headphones. These jacks are
controlled by the volume up / down buttons on the ADV200 or the remote control.
Wireless FM Modulator
The ADV200 is equipped with buit-in wireless FM Modulator*, that allows you to listen to the ADV200 audio signal by tuning your
vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9MHz). This feature is accessed by using either the FM transmitter
buttons on the remote (On/Off, Channel Select) or the FM Select button on the unit.
AV1 Input
The AV1 video input may be connected to a Video cassette Player (VCP), video game system, or other audio / video devices. To
access the A/V1 input, turn the ADV200 on and press the source button on the ADV200 or the Source button on the remote control
until “AV1” is displayed on the screen. Turn the video source component on with its power button or remote control. The ADV200 is
now ready to play the audio and video signals from the source connected to AV1 input. The AV1 input requires a 8010730 cable.
*NOTE: In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM
signal from the overhead pod may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio
stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM transmitter in
your overhead pod.
If wireless reception is unsatisfactory, an optional wired relay box (Audiovox P/N SIRSWB) can be installed which will improve audio
quality. Please contact the installer if this is the case with your product.