Filter
Top Products
Installing the shuttle (DT102, DT85 and DT7) into the DTT7810FM
NOTE: Be sure to turn the DTT7810FM OFF before installing the shuttle.
1.) Insert the bottom part of the shuttle (#1) into the lower part of the docking station (#2).
2.) Center the shuttle in the docking station. There are two tabs on the rear of the shuttle that
will line up with the two recessed areas on the docking station (#3).
3.) Place your fingers behind the top of the DTT7810FM speakers (#4) and press the upper
corners of the shuttle (#5) with your thumbs until the shuttle locks into the docking station
and a click is heard.
Removing the shuttle from the DTT7810FM
NOTE: Be sure to turn the DTT7810FM OFF before removing the shuttle.
1.) Press the release button (#6) located on the top of the DTT7810FM. The top portion of the
shuttle will move slightly forward.
2.) With both hands tilt the top portion of the shuttle forward while lifting the shuttle out of the
docking station.
5
1
6
4
4
3
2
5
10