Barco R9000740 Home Theater Screen User Manual


 
APPENDIX E : ADJUSTMENT BLOCKS
R5975238 BARCOVISION 701 MULTIMEDIA 070497
APPENDIX E : ADJUSTMENT BLOCKS
R5975238 BARCOVISION 701 MULTIMEDIA 070497
E-2
APPENDIX E : ADJUSTMENT BLOCKS
E-2
APPENDIX E : ADJUSTMENT BLOCKS
When
ENTER
is pressed, the warning disappears. Press
ADJUST
to start up the
'adjustment mode'
and select
'Service'
with the arrow keys.
Follow the procedure as described in
'Deletion of blocks'
.
Reselect the new source with the numeric keys on the RCU or the local keypad
even when the new source is already displayed on the screen.
By reselecting this new source, you force the projector to write the source header
in the free space created by the previous deletion action. The new source can
now be adjusted, the settings will be stored for future use.
Attention :
When the warning is displayed by pressing
ENTER
, you will see the normal
image. Do not forget to start the 'deletion of a block' procedure, otherwise the
image settings of the last selected source will be overwritten with the new
adjustments.
B. projector equipped with RCVDS or VS05.
When a new source is connected :
a) the projector looks for the most corresponding adjustment block. If such a
block is present, the settings will be used to display the connected source.
b) the projector does not find a matching block. The warning is displayed. Follow
the procedure as in A.
WARNING
All memory blocks are
used.
Please, go to the
service mode, delete a
block and reselect the source
or return to an
existing source.
ATTENTION
Any adjustment will
corrupt he latest used
block.
<ENTER> to continue
blocks available, the projector dis-
plays a warning.
Press
ENTER
to continue and start
up the adjustment mode to delete a
block.
It will be necessary to delete an
existing block to create adjustment
space for the new source.
When
ENTER
is pressed, the warning disappears. Press
ADJUST
to start up the
'adjustment mode'
and select
'Service'
with the arrow keys.
Follow the procedure as described in
'Deletion of blocks'
.
Reselect the new source with the numeric keys on the RCU or the local keypad
even when the new source is already displayed on the screen.
By reselecting this new source, you force the projector to write the source header
in the free space created by the previous deletion action. The new source can
now be adjusted, the settings will be stored for future use.
Attention :
When the warning is displayed by pressing
ENTER
, you will see the normal
image. Do not forget to start the 'deletion of a block' procedure, otherwise the
image settings of the last selected source will be overwritten with the new
adjustments.
B. projector equipped with RCVDS or VS05.
When a new source is connected :
a) the projector looks for the most corresponding adjustment block. If such a
block is present, the settings will be used to display the connected source.
b) the projector does not find a matching block. The warning is displayed. Follow
the procedure as in A.
WARNING
All memory blocks are
used.
Please, go to the
service mode, delete a
block and reselect the source
or return to an
existing source.
ATTENTION
Any adjustment will
corrupt he latest used
block.
<ENTER> to continue
blocks available, the projector dis-
plays a warning.
Press
ENTER
to continue and start
up the adjustment mode to delete a
block.
It will be necessary to delete an
existing block to create adjustment
space for the new source.