Beko 28C769IDS CRT Television User Manual


 
17
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURES
MAIN MENU
Use »0« – »9« to select station position 900.
Press »
MENU
« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Select »SETUP« with » «, » « and confirm with
»
«.
– The »SETUP« menu appears.
Select »Program No« with
» «, » « and set the preset
channel with
» « or » «.
Select »Search« with
» «, » « and start the search
with
» « or » «.
– If a strong station signal is received, the search is
interrupted and the picture appears. Repeat the search until
the channel you want appears on the screen.
EXIT
SELECT
OK
Tuning channels using the search
CHANNEL
FINE TUNE
SEARCH
AUTOPROGRAM
PROGRAM NO
STORE
DIGITAL SETUP
BACK
SETUP
C 06
0
< >
900
Select »STORE« with » «, » « and confirm with » «. The »STORED« message
appears.
Press »
EXIT
« to finish the setting.
Press »
MENU
« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Select »SETUP« with » «, » « and confirm with
»
«. The »SETUP« menu appears.
Select »FINE TUNE« with
» «, » « and set it
with
» « or » «.
CHANNEL
FINE TUNE
SEARCH
AUTOPROGRAM
PROGRAM NO
STORE
DIGITAL SETUP
BACK
SETUP
C 06
0
< >
900
Fine tuning analogue television stations
The television automatically tunes itself to the best possible reception. You may need
to carry out manual fine tuning in areas where there is poor reception.
Select »STORE« with
» «, » « and confirm with » «. The »STORED« message
appears.
Press »
EXIT
« to finish the setting.