Filter
Top Products
22
DDVa (
Model dependant
) (Dynamic Digital Video Adaption):
You can increase the picture sharpness byselecting DDVa as ON.
IMPORTANT NOTE: Your TV has Digital Comb Filter, DLTI (Digital Luminance
Transient Improvement),
CTI (Colour Transient Improvement)
features to improve picture
quality. These features are set ON and they can not be changed by the end user.
TILT (
Model dependant
):
Because of the structure of the picture tubes, your picture can be lost on the corners of the
screen depending on the position of your TV, north-south-east-west.
To clear this effect, you can adjust the TILT setting and prevent the picture loss (
Model
dependant
).
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
DDVa
COLOUR TEMPERATURE
PICTURE
ON
NORMAL
Picture settings
Press »
MENU
« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
DDVa
COLOUR TEMPERATURE
PICTURE
ON
NORMAL
BACK
BACK
You can set the noise suppression of the picture.
You can set the noise suppression to one of three settings:
»NORMAL«, »WARM« and »COOL«.
Press »
MENU
« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Select »BRIGHTNESS«, »CONTRAST«, »COLOUR« or
»SHARPNESS« with
» «, » « and adjust them with
» « or » « .
Press »
EXIT
« to finish the settings.
Note:
After a short while the »PICTURE« menu reappears. The settings are saved as the »USER«
picture default setting.
BACK
BACK
Setting the picture features
Select »COLOUR TEMPERATURE« with » «, » « and set the desired value with
» « or » «. Press »
EXIT
« to finish the settings.
Select »PICTURE« with
» «, » « and confirm with
»
«.
Select »PICTURE« with
» «, » « and confirm with
»
«.
– The »PICTURE« menu appears.
– The »PICTURE« menu appears.