Filter
Top Products
5
Getting started
Remove your Television carefully
from the box. You may wish to
You can use an outdoor or indoor aerial.
However, if you use an indoor aerial the
quality of the reception may be reduced
and adjustment of the aerial may be
required when changing programs.
• Do not plug in any scart leads until
you have tuned the TV in.
Please note
If you live in a poor reception area or use an
indoor aerial you may experience loss or
corruption of teletext transmissions.
Switching on
Mains power
Connect the TV mains plug into your domestic
mains socket outlet (230 V 50 Hz AC).
And switch on.
Please Note
When not in use disconnect the plug
from the mains power supply.
Switching the TV on for the first time
To install your TV, please read the sections
“TV controls” and “ Tuning the television”.
Press the Standby
button on the
remote control to switch
the
TV to standby. The standby
indicator will brighten.
Please Note
Do not leave the television on standby
unattended or overnight.
Battery fitting
Insert the 2 AAA Batteries supplied into
the compartment on the rear of the remote
control, ensure you follow the polarity
diagram inside the compartment.
Press the Power button on
the front of the TV. The
standby indicator will
illuminate.
Press a Numeric button or the
Program up or Program down
button on the remote handset or
Program up or Program down
button on the front panel to
switch the TV on.
The standby indicator will dim.
The TV will come on after a few
seconds.
Read these instructions before use.
Aerial connection
To connect an aerial, plug the aerial lead
into the aerial socket on the rear of the
TV.
store the packaging for future use.
In the box
Inside this package you should have:
• Television
• Remote control
• User guide
• AAA batteries x 2