Filter
Top Products
8
Tuning the television
There are two ways of tuning your television:
Manual, where you control the tuning process
or
Autoprogram where the television does it all
automatically.
Please Note
If the TV is set to a channel with no signal the
TV will return to standby after 5 minutes.
The time remaining is displayed on the screen
the last 60 second will be displayed.
Manual tuning
Tuning the TV is accessed through the
SETUP menu.
There are two ways to access the SETUP
menu:
Press the blue FASTEXT button.
or
Press the Menu button and use the
Program down button to select
SETUP. Press the OK button to
enter the SETUP menu.
Press the power button on the front of the TV.
The Stand-by indicator will illuminate.
Press a numeric button or Program up or
Program down on the remote control or TV
to switch the TV on from Stand-by?
The Stand-by indicator will dim and the
TV will come on after a few seconds.
Please note
The system I will be displayed automatically
on SYSTEM row.
the TV will exit the menu system.
Please note
If you do not press any buttons for 15 seconds
CHANNEL
SYSTEM
FINE TUNE
SEARCH
AUTOPROGRAM
CHILD LOCK
PROGRAM NO
STORE
BACK
SETUP
S 07
I
0
< >
OFF
P1
C/S
Using the TV
Note:
1. The TV is controlled by a menu system.
2. EACH menu has a use full prompt chart
diagram attached.
3. Use the Program up/down buttons
to scroll throuh the menu headings.
4. Use the Volume +/- buttons to make
any changes you want when the menu
heading is highlighted in white.
5. A fuller explanation of each menu is
given in this instruction book.
Use theProgram down
button to
select PROGRAM NO.
Use the
Volume up/down
buttons
to select the program number.
Use the Program down button to
select Store. Press theOKbutton
and STORED will appear on the
STORE line.
You have now stored the first
channel.
Use the Program up button to
select again SEARCH and
continue the tuning procedure
until you have tuned in all the
programmes you want or the
television can receive.
In the Setup menu select PROG
NO and change to P1 using
the Program down button to
select it and the Volume up
button to change it.
Starting with Program 1, tune
in the first channel as follows:
Use the Program down button
to select SEARCH.
Press the Volume up or Volume
down button to start the tuning
search.
When the search finds a strong
channel signal it will stop
searching. The picture will appear.
Identify which channel you are
watching (BBC 1, ITV 1 etc.) and
decide which program number you
want it to be. (e.g. BBCI = PI
BBC2 = P2 etc).