Burley 950038 TV Cables User Manual


  Open as PDF
of 2
 
Note: Your new Burley flex connector
should exactly match your old Burley
connector.
• Square tow bar = 4 ridges
• Round tow bar = smooth
These pieces are NOT
interchangeable.
950037 Contents:
(1) Hitch connector for round tow bar
(1) Lock nut
(1) Safety strap assembly
(1) Bolt
(2) D-ring/clip
950038 Contents:
(1) Hitch connector for square tow bar
(1) Lock nut
(1) Safety strap assembly
(1) Bolt
(2) D-ring/clip
For use with Burley
standard and forged
metal hitches
1. Remove trailer from bicycle.
2. Remove existing bolt, safety strap, lock
nut and D-ring/clip from flex connector
which is located at the end of tow
bar. FIGURE 1
3. Remove old flex connector from end
of tow bar and insert new connector,
aligning hole in connector with holes
in tow bar.
Hitch Flex Connector
Replacement Instructions For:
Round Tow Bar Kit 950037
Square Tow Bar Kit 950038
Note: Your new Burley flex connector
should exactly match your old Burley
connector.
• Square tow bar = 4 ridges
• Round tow bar = smooth
These pieces are NOT
interchangeable.
950037 Contents:
(1) Hitch connector for round tow bar
(1) Lock nut
(1) Safety strap assembly
(1) Bolt
(2) D-ring/clip
950038 Contents:
(1) Hitch connector for square tow bar
(1) Lock nut
(1) Safety strap assembly
(1) Bolt
(2) D-ring/clip
For use with Burley
standard and forged
metal hitches
1. Remove trailer from bicycle.
2. Remove existing bolt, safety strap, lock
nut and D-ring/clip from flex connector
which is located at the end of tow
bar. FIGURE 1
3. Remove old flex connector from end
of tow bar and insert new connector,
aligning hole in connector with holes
in tow bar.
Hitch Flex Connector
Replacement Instructions For:
Round Tow Bar Kit 950037
Square Tow Bar Kit 950038
FIGURE 1: Forged Hitch Shown
Tow Bar
Hook fastened to
D-ring/clip
under tow bar
Flex Connector
D-Ring/Clip
Bolt
Quick Release Lever
Retaining Pin
Safety strap
wrapped twice
around chainstay
FIGURE 1: Forged Hitch Shown
Tow Bar
Hook fastened to
D-ring/clip
under tow bar
Flex Connector
D-Ring/Clip
Bolt
Quick Release Lever
Retaining Pin
Safety strap
wrapped twice
around chainstay
THIS PART IS DESIGNED FOR USE ON BURLEY
TRAILERS ONLY. USE ON ANY OTHER TRAILER
CAN RESULT IN SERIOUS INJURY.
IMPORTANT
THIS PART IS DESIGNED FOR USE ON BURLEY
TRAILERS ONLY. USE ON ANY OTHER TRAILER
CAN RESULT IN SERIOUS INJURY.
IMPORTANT