Chauvet CBB-6 TV Mount User Manual


  Open as PDF
of 1
 
CBB-6 Instructions
The CBB-6 works with the COLORband PiX™ Mini (shown below), COLORband PiX™, and most linear/strip lights.
Basic Assembly
To assemble the CBB-6 bracket:
1. Unscrew the bracket adjustment knob on the light you wish to attach to the bracket.
2. Align the light to any of the small mounting holes on the CBB-6 (maximum 6 lights).
3. Reattach the bracket adjustment knob to the light.
4. Repeat up to a total of six times with a pair of CBB-6 brackets.
The final assembly should appear similar to this:
Advanced Assembly Options
The CBB-6 is fully stackable. Use the included screws to attach another CBB-6 to the top
of the bracket for additional rows of lights.
Do NOT connect more than two CBB-6 brackets vertically (for a maximum of 12 strip
lights).
Before mounting the CBB-6 onto any structure, ensure that the structure onto which
you are mounting the product on can support the total weight.
When rigging the product onto truss, you should use a mounting clamp with the
appropriate weight capacity. The CBB-6 bracket has multiple 13 mm holes which are
appropriate for this purpose.
CHAUVET® recommends the CLP-15 heavy-duty clamp (sold separately).