Clarion MAX675VDII DVD Player User Manual


 
21
MAX675VDII
English
Owner’s manual
6. OPERATIONS
Basic Operations
Note:
Be sure to read this chapter referring to the chapter
3. CONTROLS” (page 5).
CAUTION
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level may harm your hearings.
Be careful about adjusting the volume.
Turning on and off the power
Note:
Start the engine before using this unit.
Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Start the engine. The illuminations on this unit
light up.
2. Press the [&] (POWER) button to turn on the
power.
* Pressing this button while the power is turned
on turns off the back light of the liquid crystal
panel.
3. To turn off the power, press and hold the [&]
(POWER) button for more than 1 second.
Selecting a mode
1. Press the [SRC] button to display the Source
menu.
* External equipment not connected to this unit
is not displayed.
2. Touch the desired mode key.
About the CT (Clock Time) display
When the Navigation system is connected, the
displayed clock data is based on the CT (clock
time) data in the GPS data.
Adjusting the volume
1. Press the [+]/[] buttons to adjust the volume.
[+]: Increases the volume.
[]: Decreases the volume.
The volume level indicated in the display is
in a range from 0 (min.) to 33 (max.).
CAUTION
CAUTION
While driving, keep the volume level at which
external sounds can be heard.
Mute
1. When in the TUNER, Satellite Radio, VISUAL
or TV mode, press the [p] button to turn
the mute on and off.
When in the DVD PLAYER, iPod or changer
mode, keep pressing the [p] button more
than 1 second to turn the mute on and off.
When the mute is turned on, “ ” appears
at the bottom left of the screen.
Opening the operation panel
and adjusting the angle
Open the operation panel when inserting/ejecting
a disc.
The angle of the operation panel can be adjusted
depending on the mounting angle of the unit or
light coming into the car.
CAUTION
CAUTION
Do not move the operation panel forcibly or
do not apply strong force to the operation
panel.
When the operation panel is operating, be
careful not to get your hand or finger caught
between the operation panel and main unit
or its mechanical parts.
The driver should not operate the operation
panel while driving.
Engine ON
position