Filter
Top Products
Other Functions
46
MAX675VDII
English
Owner’s manual
Changing over monitor display size
• The factory default setting is “[F.WIDE]”.
Note:
• This function is not available while you are driving.
• Switch to the DVD PLAYER (DVD video or video
CD)/VISUAL/TV mode you see.
1. Touch the screen to display the mode menu,
then touch “Display size” key ([F.WIDE], etc.)
at the top right of the screen.
The screen changes to the SCREEN MODE
menu.
* You can hide the mode menu by touching and
holding the “Display size” key (“■CLOSE■”).
2. Touch the [F.WIDE], [WIDE], [CINEMA], or
[NORMAL] key to select the desired monitor
display size.
“F. WIDE”: (full wide mode)
The whole image elongates horizontally.
“WIDE”: (wide mode)
The image at right and left ends in a display
elongates horizontally.
“CINEMA”: (cinema mode)
The image at both top and bottom in a display
disappears.
“NORMAL”: (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
Note:
• When a 4:3 scale image (non-wide screen image)
is displayed, part of the image may be out of view
or the image may be distorted when in wide mode
or full-wide mode. Please use normal mode for
viewing such images with the proper aspect ratio.
• During superimposed display, it becomes a full-
wide mode.
Internal amplifier cancel function
This function is used to disable the internal
amplifier when an external amplifier is
connected.
• The factory default setting is “OFF”.
1. Press the [ADJ] button.
2. Touch the [AUDIO EXT.] key.
3. Touch the [ON] or [OFF] of the AMP CANCEL
item to turn the internal amplifier on or off.
4. Touch the [Back] key to return to the previous
screen.