Clover Electronics DV1670 DVR User Manual


 
Chapter 14. Event Section In-Depth
3. MOTION DETECTION GUI
Page
142
Range: Set the area where a motion would be detected.
There are also indications in pink color when motion is detected. It also serves as feedback on your
sensitivity settings. If you see the pink color in the grid you choose for motion then such motion activity
is sensitive enough to be detected. Please use trial and error to configure it just right.
Set the area by using the direction key(or mouse dragging) and press “Enter”.
Select the area where the motion is detected : The selected area is outlined with blue.
• Cancel the area where the motion is detected : No signal
The area where the motion would be detected is marked with red.
Note : You can use the hot key to set all areas.
No. “1” : Select all
No. “2” : Cancel all