Filter
Top Products
Chapter 1—Introducing the UCommand-616
Quick Start 3
9. As soon as the button has been learned, the screen will ad-
vance the to the next button to be learned. Again, press the
corresponding Device button.
You can program any button in any order just be selecting it
with the tip of your finger.
10. Once a full screen is programmed, the remote will automati-
cally display the next screen to be learned, until all four
screens have been programmed. You can use the Left/Right
arrows at the bottom of the display to advance to any screen
at any time.
11. You do not have to program all available buttons. To pro-
gram the next device in your system, press the
menu
button at
any time to back out until you can select another device.
12.
To Customize your UC-616 and change button sizes and
labels, get to the Setup menu and select Adjust. Select De-
vice, and turn to page 31 in this manual for further
instructions.
Do not attempt to create more than eight (8) buttons on
either one of the two Main menu pages. Please read
carefully the chapters regarding customization in this man-
ual.
13.
You can also:
Procedure Page
Get date and battery level 14
Set the clock 22
Resize and Add buttons 32
Relabel buttons 37
Delete buttons 38
Create macros 43
Adjust the LCD display 48