Filter
Top Products
11
Operating Your TV
Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batteries in the remote,
you are ready to use the TV. The first thing you should do is program your TV so it memorizes all of available channels.
To turn your TV on, press the POWER button on the remote control. You can also
use the POWER button on the front panel. Make sure your TV is plugged in before
you try to turn it on.
Your TV's memory determines the channels that are available using the CH buttons. If a channel is not in
memory, you can tune to it with the number buttons, but not with the CH buttons. Follow these steps to pro-
gram your TV's memory:
With the TV on, press the MENU button twice, then Set-Up menu will appear.
Use the CH buttons to select Reception , then use the VOL buttons to select Air or Cable . If
you connected an antenna to your TV, select Air ; If you connected a cable system, select Cable .
Use the CH buttons to select Memorize Channels , then use the VOL buttons to enter the
Memorize Channels process. Again press the VOL buttons to begin.
Press the MENU button to return to Set-Up menu.
Press the MENU button three times to return to normal TV viewing.
Your TV's channel memory will not be affected by a power outage. You will not need to re-program the memory
unless you change the type of cable or antenna connected to your TV.
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input : TV
Adjust Next
1
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input : TV
Adjust Next
3-1
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input : TV
Adjust Next
2
Memorize Channels
Air 11
Memorizing all air channels.
Please, stand by.
Press MENU to cancel and
return to Set-Up menu.
3-2
5
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input : TV
Adjust Next
4
CHAPTER
3