Filter
Top Products
2
General Operation and Handling Guidelines
Datamax-O’Neil VMP-2000 Installation Guide
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures
• Take periodic rest breaks
Care and Prevention
During operation, do not expose printer to temperatures over 50°C/122°F or under
-40°C/-40°F. In storage, do not expose printer to temperatures over 70°C/158°F or under
-20°C/-4°F.
• Use only approved power supplies or damage may result.
• Do not spill liquids on printer or immerse.
• Do not attempt to service this unit. Refer all servicing to a Datamax-O’Neil authorized
service center.
Copyright
This installation guide and any examples contained herein are provided “as is” and are
subject to change without notice. Datamax-O’Neil makes no warranty of any kind with regard
to this installation guide, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Datamax-O’Neil shall not be liable for
any errors or for incidental or consequential damages in connection with the furnishing,
performance, or use of this installation guide or the examples herein. This guide is
copyrighted. All rights are reserved. This guide may not, in whole or in part, be reproduced,
translated, stored in a retrieval system or transmitted in any form or by any means,
electronic, mechanical, photographic, or otherwise, without the prior written consent of
Datamax-O’Neil.
Specifications are subject to change.
COPYRIGHT © 2010, DATAMAX-O’NEIL