Filter
Top Products
43
ENGLISH
10
ADJUSTING THE PICTURE QUALITY
1
3
Use the 0 and 1 cursor buttons to select the picture
memory, then press the ENTER button.
• The display switches as follows:
STD (STANDARD) ´ M1 (MEMORY 1) ´ M2 ´
M3 ´ M4 ´ M5
STD (Factory default)
When this is selected, both the picture quality and
function are reset to factory setting.
M1 ~ M5
Picture quality settings you have adjusted can be
stored here.
Select the item to change using
0 and 1 buttons.
ADJUST MODE
• The contrast, brightness, sharpness and color (HUE)
can be adjusted.
• Perform steps 4 ~ 6 to adjust the picture quality
(ADJUST MODE).
GAMMA
• Select this if dark portions of the picture are too dark
or bright portions are too bright.
• Perform steps 7 ~ 9 to adjust the gamma correction
(GAMMA).
ENTER
7
0
8
+
10
9
TOP MENU DISPLAY
MARKERRANDOM
PAGE
A-B
ZOOM
DIMMER PIC. ADJ
REPEAT
SETUP
CALL RETURN
SKIP SLOW / SEARCH
ANGLE SUBTITLE AUDIO
SEARCH MODE
PLAY
STILL /
PAUSE
STOP
T. MENU
DISP.
MENU
1
2, 3, 4, 5, 7, 8
2, 6, 9
P ICTURE ADJUST
STD
P ICTURE MODE
M1 M2 M3 M4 M5
ENTER
Remote control unit
Remote control unit
MEMORY 1 GAMMA
0000
Press the PIC.ADJ button during playback.
PIC.ADJ
Remote control unit
2
4
Press the ª cursor button to select the adjust mode,
then use the
0 and 1 cursor buttons to select the
image quality adjustment item.
CONTRAST (–6 ~ +6)
Adjusts the contrast of the image.
BRIGHTNESS (0 ~ +12)
Adjusts the picture’s brightness.
SHARPNESS (–6 ~ +6)
Adjusts the sharpness of the picture.
HUE (–6 ~ +6)
Adjusts the balance of the green and red. (This does
not affect Progressive Scan images and the component
video out.)
MEMORY 1 GAMMA
CONTRAST
0 000
Remote control unit
Remote control unit
Remote control unit
ENGLISH