Filter
Top Products
–
14
–
CONNECTION TO A TV (FOR VIDEO)
DVD
Audio out Video out
• Method 1 DVD Player + TV with Video Input Jack
•
Method 2 DVD Player + TV with S-Video Input Jack
• Method 3 DVD Player + TV with Component Video Jacks
CBYCR
S-VIDEO IN
COMPONENT
S-VIDEO IN
VIDEO IN
PBYPR
LR
TV
Method 1
Good pictureBasic Audio
Method 2 Method 3
Better picture
Best picture
S-Video out
Component Video out
AV Cable
S-Video
Cable
Video
Cables
Notes
¡If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output
jacks of the DVD player. Refer to page 12.
¡Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not
included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF
Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm
coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection,
remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal
of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna
terminal as described above.
Note
¡The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s
antenna terminal through an RF Modulator.
or
or
or