Dynex DX-22L150A11 Flat Panel Television User Manual


 
Adjusting the sound
17
DX-15L150A11/DX19L150A11/DX-22L150A11
Adjusting the sound
Adjusting the sound
To adjust the sound:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight AUDIO. The AUDIO menu opens.
3 Press or to highlight an option, then press or to adjust
the option. With the Equalizer Off you can select:
Bass—Adjusts the low sounds.
Treble—Adjusts the high sounds.
With the Equalizer On you can select:
Equalizer Mode—Selects the sound mode. You can select:
Standard (for normal programs)
Theater (for movies)
Music (for musical programs)
News (for news programs)
Custom (for a customized sound mode).
Note: You can also press AUDIO one or more times to
select the Equalizer mode.
Equalizer Setting—Selects the equalizer frequency. You
can select 120 Hz, 500 Hz, 1.5 kHz, 5 kHz, or 10 kHz.
Press or to switch between columns, then press or
to adjust the setting. Press MENU to confirm.
You can adjust the following options regardless of the Equalizer
settings:
Balance—Adjusts the balance between the left and right
audio channels.
Auto Volume—Automatically adjust the volume to be
consistent across programs and channels.
Digital Audio/SPDIF—(digital channels only) Selects the
digital audio output mode. You can select RAW (outputs
audio in its original format) or PCM (outputs the audio in
PCM mode, if available).
MTS/SAP—Selects the sound mode (analog channels only).
Mono—Produces a clearer sound if stereo sound is
difficult to hear.
Stereo—Produces dynamic stereo sound for sporting
events and concerts.
SAP—Selects a second language, weather, or added
commentary, if available.
Audio Language—(digital channels only) Selects an
alternate audio language, if available.
Reset Audio Settings— Resets all audio settings to
factory defaults. When you select this option, a confirmation
box opens. Press or to select Yes or No, then press
ENTER to confirm.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Playing TV audio only
You can turn off the picture on your TV and listen to only the program
audio.
To play only the TV audio:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS. The CHANNELS menu
opens.
3 Press or to highlight Audio Only, then press or to
select On.
4 Press EXIT to close the menu. After pressing EXIT, the picture will
turn off in approximately three seconds.
Notes:
Audio Only works only when the input source is TV and your TV is receiving
a broadcast signal.
To exit Audio Only mode, press any button. When you exit Audio Only
mode, the Audio Only option is automatically reset to Off.
ENTER MENU
Setup Wizard
MOVE SELECT PREVIOUS
Time
Mode
Time Zone
Daylight Savings
Year
Month Jan
1Day
12 : 04 AMTime
On
2010
Pacic
Auto
DX-15L-150A11_09-1036.book Page 17 Tuesday, December 1, 2009 9:52 AM