Emerson EWC0902 TV VCR Combo User Manual


 
- 25 - EN
9J27
TROUBLESHOOTING GUIDE
If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR,
locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to
remedy the problem.
PROBLEM CORRECTIVE ACTION
No power.
Make sure the AC cord is connected to an AC outlet.
Make sure the car battery cord is connected to vehicle’s cigarette
lighter socket and to DC 13.2V (12V) jack on back of the TV/VCR.
Check the fuse (5A, 250V) in car battery cord.
Make sure the power is turned on.
No picture and sound.
Make sure the AC cord is connected to an AC outlet.
Check antenna connection.
Let the TV/VCR program its tuner memory.
No picture or poor picture on
Adjust direction or replace antenna.
TV/VCR.
Adjust picture controls.
No sound or poor sound.
Adjust volume control on remote control or main unit.
Press the MUTE button to restore sound.
Timer recording is not possible.
Make sure the timer recording is set correctly.
Make sure the power is off.
Make sure the TV/VCR clock is set correctly.
Cannot go into Record mode.
Make sure the tape has an erase-prevention tab. If need, cover the
hole with plastic tape.
Playback picture is partially noisy.
Adjust tracking control for a better picture using the CHANNEL K
or L button on the TV/VCR.
No picture but the audio is OK in
Head cleaning may be necessary. Refer to “AUTO HEAD
playback.
CLEANING” on page 24.
No operation by infrared Remote
Make sure the AC cord is connected to an AC outlet.
Control.
Check batteries in remote control.
Video or color fades in and out
You can not copy a copyrighted video tape. You are experiencing
when making a copy of a video tape
.
copy guard protection.
Can not set the auto clock to ON.
Make sure the AC cord is connected to an AC outlet.
Blotted or unlevelled color
Disconnect power cord from AC outlet once, then reconnect it after
on the screen 30 minutes.