Epson LS47P2 Projection Television User Manual


 
Setting Up the TV 15
7 Connect the other end of the cable to the L–Audio–R connectors on the tuner.
8 Plug the TV and tuner into an electrical outlet.
9 See the User’s Guide included with the tuner for instructions on setting up channels,
entering the date and time, and making other basic settings.
Connecting the CD-R/RW Drive
Follow these instructions to connect the CD-R/RW drive included with your TV.
1 Connect the square end of a USB cable to the USB port on your external CD-R/RW
drive.
2 Connect the flat end of the USB cable to the EXT. I/F connector on the back of the TV.
3 Plug the power cord that came with the CD-R/RW into the drive’s power supply, then
connect the cords to the drive and an electrical outlet.
4 Turn on the CD-R/RW drive by flipping the power switch in back.
Note
To use the TV remote
control to operate the
tuner, see page 35. For
more information on using
the tuner, see the User’s
Guide that came with it.
Note
If you purchased an
optional Epson TV stand,
a mounting bracket is
included for the drive. You
may want to attach the
drive to the stand before
connecting its cables.
USB cable
External
CD-R/RW
drive
Note
The connectors on your
CD-R/RW drive may be in
different positions than
shown.