Filter
Top Products
24
Group playback mode of DVD audio discs
(Group Play)
When an option marked with “>” is displayed, use the up or
down cursor buttons to change the setting, and press the
ENTER button to confirm the entry.
Continue
Plays all groups. Moving between groups is not possible when
the menu screen is displayed.
Single
Plays the group selected using the menu. Fast forward, track
skip, etc. cannot be used to move between groups.
Down mix (2chDownMix)
When an option marked with “>” is displayed, use the up or
down cursor buttons to change the setting, and press the
ENTER button to confirm the entry.
Lo/Ro
Usual stereo mode. Use this for stereo playback, etc.
Lt/Rt
This mode is useful when recording multi-channel sound on a
cassette tape deck or CD recorder connected via the AUDIO
OUT jacks. With a Dolby Pro Logic decoder, the recorded
sound can be decoded into multi-channel sound.
<
To downmix multi-channel sound, set the Analog Out setting
to “2ch”
< Note that this setting is ignored for DVD audio discs and
Super Audio CDs; these are down mixed in the Lo/Ro mode
automatically.
Use these speaker setup menus only when the 5.1-channel
AUDIO OUT terminals are connected to a surround sound
amplifier.
There is no need for this setup when not using the 5.1-channel
AUDIO OUT terminals, or when you use the speaker menus of
the amplifier. In this case, leave this setup as it is (factory
settings).
The speaker setup has effects on the sound output from the 5.1-
channel AUDIO OUT terminals when the Analog Out setting is
set to “Multi ch”.
When the Analog Out setting is set to “2ch”, the settings made
here are ignored.
Settings Settings (Speaker Setup)