Extron electronic IR 801 Universal Remote User Manual


  Open as PDF
of 2
 
USP 405
UNIVERSAL SIGNAL PROCESSOR
ADJUST
MENU
NEXT
FREEZE
12345
PICTURE ADJUSTMENTS
CENTER SIZE BRT/CONTCOL/TNT ZOOM DETAIL
INPUTS
RGB
UNIVERSAL
FREEZE
COMPOSITE
S-VIDEO SDI
USB 405 Front Panel
IR 801 Remote
IR 801 Remote Control Instruction Guide
Install two AAA batteries as shown at right.
Operation
The buttons on the IR 801 duplicate the USP 405‘s
front panel controls for normal operation. The USP
responds to commands from the IR 801 as if that
button or knob were pressed or rotated on the
USP. From a
distance of no more than 50 feet, the IR 801 sends
infrared (IR) signals to the USP 405 via the front
panel IR sensor.
The USP 405 must be powered on
and active before operating
the IR 801.
Refer to the USP 405 User’s Manual
for details.
Aspect Ratio Presets
These buttons will recall up to three saved memory presets (sizing and centering information).
Horizontal and Vertical Filters
Use the horizontal filter button to adjust image detail and the vertical filter button to reduce image
flicker while maintaining image sharpness.
For all input formats (except RGB), the Detail image adjustments (+ and -) are
used instead of the horizontal and vertical filters.
USP 405
UNIVERSAL SIGNAL PROCESSOR
ADJUST
MENU
NEXT
FREEZE
12345
PICTURE ADJUSTMENTS
CENTER SIZE BRT/CONTCOL/TNT ZOOM DETAIL
INPUTS
RGB
UNIVERSAL
FREEZE
COMPOSITE
S-VIDEO SDI
USB 405 Front Panel
IR 801 Remote
IR 801 Remote Control Instruction Guide
Install two AAA batteries as shown at right.
Operation
The buttons on the IR 801 duplicate the USP 405‘s
front panel controls for normal operation. The
USP responds to commands from the IR 801 as if
that button or knob were pressed or rotated on
the USP. From a
distance of no more than 50 feet, the IR 801 sends
infrared (IR) signals to the USP 405 via the front
panel IR sensor.
The USP 405 must be powered on
and active before operating
the IR 801.
Refer to the USP 405 User’s Manual
for details.
Aspect Ratio Presets
These buttons will recall up to three saved memory presets (sizing and centering information).
Horizontal and Vertical Filters
Use the horizontal filter button to adjust image detail and the vertical filter button to reduce image
flicker while maintaining image sharpness.
For all input formats (except RGB), the Detail image adjustments (+ and -) are
used instead of the horizontal and vertical filters.
USP 405
UNIVERSAL SIGNAL PROCESSOR
ADJUST
MENU
NEXT
FREEZE
12345
PICTURE ADJUSTMENTS
CENTER SIZE BRT/CONTCOL/TNT ZOOM DETAIL
INPUTS
RGB
UNIVERSAL
FREEZE
COMPOSITE
S-VIDEO SDI
USB 405 Front Panel
IR 801 Remote
IR 801 Remote Control Instruction Guide
Install two AAA batteries as shown at right.
Operation
The buttons on the IR 801 duplicate the USP 405‘s
front panel controls for normal operation. The
USP responds to commands from the IR 801 as if
that button or knob were pressed or rotated on
the USP. From a
distance of no more than 50 feet, the IR 801 sends
infrared (IR) signals to the USP 405 via the front
panel IR sensor.
The USP 405 must be powered on
and active before operating
the IR 801.
Refer to the USP 405 User’s Manual
for details.
Aspect Ratio Presets
These buttons will recall up to three saved memory presets (sizing and centering information).
Horizontal and Vertical Filters
Use the horizontal filter button to adjust image detail and the vertical filter button to reduce image
flicker while maintaining image sharpness.
For all input formats (except RGB), the Detail image adjustments (+ and -) are
used instead of the horizontal and vertical filters.
USP 405
UNIVERSAL SIGNAL PROCESSOR
ADJUST
MENU
NEXT
FREEZE
12345
PICTURE ADJUSTMENTS
CENTER SIZE BRT/CONTCOL/TNT ZOOM DETAIL
INPUTS
RGB
UNIVERSAL
FREEZE
COMPOSITE
S-VIDEO SDI
USB 405 Front Panel
IR 801 Remote
IR 801 Remote Control Instruction Guide
Install two AAA batteries as shown at right.
Operation
The buttons on the IR 801 duplicate the USP 405‘s
front panel controls for normal operation. The
USP responds to commands from the IR 801 as if
that button or knob were pressed or rotated on
the USP. From a
distance of no more than 50 feet, the IR 801 sends
infrared (IR) signals to the USP 405 via the front
panel IR sensor.
The USP 405 must be powered on
and active before operating
the IR 801.
Refer to the USP 405 User’s Manual
for details.
Aspect Ratio Presets
These buttons will recall up to three saved memory presets (sizing and centering information).
Horizontal and Vertical Filters
Use the horizontal filter button to adjust image detail and the vertical filter button to reduce image
flicker while maintaining image sharpness.
For all input formats (except RGB), the Detail image adjustments (+ and -) are
used instead of the horizontal and vertical filters.