Filter
Top Products
MKP 2000 Remote Control Panel • Reference Data
MKP 2000 Remote Control Panel • Reference Data
Reference Data, cont’d
A-5A-4
Mounting and Cabling Specifications
Electrical box cutout
Any standard box that meets the local electrical codes can be
used, but boxes from different manufacturers can have different
size openings. Extron recommends testing the fit of the MKP
inside the electrical box and then placing the box flush against
the mounting surface and tracing the cutout area.
Panel mount cutout template
Figure A-1 is a drawing that shows the dimensions for cutting a
hole to accommodate the keypad circuit board for mounting the
keypad on a flat surface. This type of installation can include a
desk or podium, or a control panel or dashboard, where the
back is protected and does not require an electrical box.
Drawn to scale; may be used as a template.
MKP 2000
VOLUME
I/O
2.63”
3.38”
Full Size
Circuit Board Box
(behind front panel)
(cut-out area should be slightly
larger)
Figure A-1 — Panel mount cutout template