Filter
Top Products
376 iRMC S2/S3
Remote Storage connections
Figure 222: Storage Devices dialog box: ServerView Suite DVD 1
Ê Click Connect to connect the DVD ROM drive (DVD 1) or the Installation
Manager boot image as remote storage.
Connect the ISO image (image file) provided by the remote storage server
as remote storage
You can use an image file provided via the remote storage server for booting
from an Installation Manager boot image.
I Before it is possible to use a virtual drive provided via a remote storage
server, the remote storage server must be installed and started (see
section "Providing remote storage via a Remote Storage server" on
page 127).
To establish the connection to the remote storage server, proceed as follows at
the remote workstation:
Ê Log into the iRMC S2/S3 web interface with Remote Storage Enabled
permission (see page 136).
Ê Select the Remote Storage page.
Ê Establish the connection to the remote storage server (see page 314).