Filter
Top Products
INSTALLATION INSTRUCTIONS M2488 PRODUCT GUIDE
1-2 CG00000-011503 REV. A April 1997
1-3.1 Rack-mount
There are three configurations for the rack-mount M2488 drive. Refer to Table 1-1 for the assembly
instructions to use with your configuration.
Table 1-1. Rack-mount Configurations
CONFIGURATION EQUIPMENT REQUIRED TOOLS
ASSEMBLY
PARAGRAPH
M2488 M2488 (one or two per tray)
IPM (one per M2488)
Terminator (may be required)
AC Power Cable (110 or 220 VAC, one per M2488)
Rack-mount tray
Front panel for one M2488 or front panel for two M2488s
Phillips screw-
driver
1-6.1
1-6.2
1-6.3
1-6.5
M2488 with ACL M2488 (one or two per tray)
IPM (one per M2488)
Terminator (may be required)
AC Power Cable (110 or 220 VAC, one per M2488)
ACL
Rack-mount tray for M2488 with ACL
Front panel for one M2488 with ACL or front panel for
two M2488s with ACLs
5 or 10-Cartridge Magazine
Phillips screw-
driver
Allen wrench
1-6.1
1-6.2
1-6.3
1-6.5
1-6.6
M2488 with FACL M2488 (one or two per tray)
IPM (one per M2488)
Terminator (may be required)
FACL
AC Power Cable (110 or 220 VAC, one per M2488)
Rack-mount tray for M2488 with FACL
Front panel for one M2488 with FACL or front panel for
two M2488s with FACLs.
7-Cartridge Magazine (one per FACL)
Phillips screw-
driver
Allen wrench
1-6.1
1-6.2
1-6.3
1-6.5
1-6.7