Filter
Top Products
INSTALLATION INSTRUCTIONS M2488 PRODUCT GUIDE
1-12 CG00000-011503 REV. A April 1997
1-6.4.4 Drive with ACL Attached (10-Cartridge Magazine)
Use this procedure if the M2488 with attached ACL is to be used with a base for a 10-cartridge
magazine.
Figure 1-4. Attaching Bases
STEP ACTION
1 Place the support base onto the M2488A41 (10-cartridge base) and attach with the four
screws. See Figure 1-4.
2 For additional stability, attach the rubber feet and two metal brackets on the bottom of the
M2488A41 as shown in Figure 1-5 on page 1-13.
3 Place the drive with ACL on the support base. Move the drive forward and attach to the pro-
jections on the support base. See Figure 1-6 on page 1-13 and Figure 1-7 on page 1-14.
4 Insert the projections of the rear bracket into the gap on each foot rail. Attach rear bracket with
two screws through the rear of the support base. See Figure 1-8 on page 1-14.