Filter
Top Products
M2488 PRODUCT GUIDE DIAGNOSTIC TESTS AND ERROR CODES
April 1997 CG00000-011503 REV. A F-23
0x08
0x01 Formatter Counter 0 test 0x0A The low byte count for Formatter Counter 0
did not contain the expected value after the
counter finished running
0x0B Test Jump Carry Out bit for the low byte
count of Formatter Counter 0 was not set as
expected after the counter finished running
0x0C WBEND_CNEH0 Interrupt not set as
expected
0x08 0x02 Formatter Counter 1 test 0x01 The Formatter Counter 1 count enable register
could not be cleared
0x02 A data miscompare occurred walking a one
through the Formatter Counter 1 high byte
count register
0x03 A data miscompare occurred walking a one
through the Formatter Counter 1 low byte
count register
0x04 Test Jump Carry Out bit for the high byte
count of Formatter Counter 1 was set prema-
turely before counter was started
0x05 An unexpected value was read in the count
enable register for Formatter Counter 1 after
the high byte counter finished running
0x06 The high byte count for Formatter Counter 1
did not contain the expected value after the
counter finished running
0x07 Test Jump Carry Out bit for the high byte
count of Formatter Counter 1 was not set as
expected after the counter finished running
0x08 Test Jump Carry Out bit for the low byte
count of Formatter Counter 1 was set prema-
turely before counter was started
0x09 An unexpected value was read in the count
enable register for Formatter Counter 1 after
the low byte counter finished running
0x0A The low byte count for Formatter Counter 1
did not contain the expected value after the
counter finished running
0x0B Test Jump Carry Out bit for the low byte
count of Formatter Counter 1 was not set as
expected after the counter finished running
0x08 0x03 Formatter Counter 2 test 0x01 The Formatter Counter 2 count enable register
could not be cleared
Table F-10. Routine 8 - Formatter Counters Diagnostic Error Codes (Continued)
ROUTINE TEST TITLE
ERROR
CODE
DESCRIPTION
DIAGNOSTIC TESTS
AND ERROR CODES