Filter
Top Products
DIAGNOSTIC TESTS AND ERROR CODES M2488 PRODUCT GUIDE
F-46 CG00000-011503 REV. A April 1997
0x13
0x02 Read Hi_data parity error check 0x09 The SPC interrupt request could not be
cleared
0x13 0x03 Read Sync host crc error check 0x01 Failed to receive data end-of-transfer signal in
SDDP hdxs register.
0x02 Incorrect SPC SCSI control signal status wait-
ing for REQ signal assertion.
0x03 Incorrect SPC SCSI control signal status wait-
ing for REQ signal deassertion.
0x04 Data transfer length error reported by SPC
0x05 SDDP failed to report expected CRC error.
0x13 0x04 Write Buffer overflow error check 0x01 Initial SPC write status is incorrect.
0x02 Error reported by Record Manager Write
Buffer function while attempting to write
clear SG-bypass.
0x03 Incorrect SPC SCSI control signal status wait-
ing for REQ signal assertion.
0x04 Incorrect SPC SCSI control signal status wait-
ing for REQ signal deassertion.
0x05 Data transfer length error reported by SPC
0x06 SDDP failed to report expected buffer over-
flow.
0x13 0x05 Read crc-b error check 0x01 Failed to receive data end-of-transfer signal in
SDDP hdxs register.
0x02 Incorrect SPC SCSI control signal status wait-
ing for REQ signal assertion.
0x03 Incorrect SPC SCSI control signal status wait-
ing for REQ signal deassertion.
0x04 Data transfer length error reported by SPC
0x05 SDDP failed to report expected CRC-B error.
0x13 0x06 Read header crc error check 0x01 Failed to receive data end-of-transfer signal in
SDDP hdxs register.
0x02 Incorrect SPC SCSI control signal status wait-
ing for REQ signal assertion.
0x03 Incorrect SPC SCSI control signal status wait-
ing for REQ signal deassertion.
0x04 Data transfer length error reported by SPC
0x05 SDDP failed to report expected header CRC
error.
Table F-15. Routine 13 - EDRC Error Detection Diagnostic Error Codes (Continued)
ROUTINE TEST TITLE
ERROR
CODE
DESCRIPTION
DIAGNOSTIC TESTS
AND ERROR CODES