Filter
Top Products
38
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)
* On-screen information disappears if you do not take any action for about 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, : S-video mode, : Comp.video mode, : RGB mode
• Setting Exhibition Mode (Exhibition Mode) All modes
You can use this option to display the enhanced contrast, which is most suitable for the use by
unspecified persons.
Each time you press or , one of the available choices appears in the following sequence:
On Off
On: Sets up Exhibition mode.
Off: Sets up normal mode.
Press to store.
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the
adjustment is changed.
* The setup will be cancelled when removing the power plug from the receptacle.
• Horizontal/Vertical installation (Installation) All modes
You can use this option to setup the number of fan rotation, etc. for horizontal and vertical
installation.
Each time you press or , one of the available choices appears in the following sequence:
Horizontal Vertical
Horizontal:For installing horizontally
Vertical: For installing vertically
Press to store.
* Be sure to make this setup when changing the direction of installation.
• Locking Main Unit Button (Key Lock) All modes
You can use this option to disable the main unit button.
Each time you press or , one of the available choices appears in the following sequence:
On Off
On: Disables the main unit button.
Off: Enables the main unit button.
Press to store.
• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press .
The “Information” screen will appear.
Mode: Input mode appears at the upper right corner of the screen.
Monitor No.: Monitor number
Freq. Scan Mode: Frequency scanning
Input Signal: Video mode
Input Sync.: Signal type
Freq.: Frequency and polarity (fH, fV)
Preset No.: RGB code number
Information screen (Video Input Mode)
Information screen (RGB2 Input Mode)