FUNAI DV220TT8 DVD VCR Combo User Manual


 
SETUP
10
EN
POWER OPEN/CLOSE
DISPLAY VCR DVD MODE
TRACKING
PLAY
STOP
REC/OTR SKIP PAUSE
MENU
TOP MENU AUDIO
SETUP
SEARCH
MODE
ZOOM
ANGLESUBTITLE
ENTER
REPEAT A-B
SPEED T-SET
123
456
789
0
+10
RETURN
CLEAR/
C. RESET
INPUT
SELECT
Installing the Batteries for
the Remote Control
Install the batteries (AA x 2) matching
the polarity indicated inside battery
compartment of the remote control.
Keep in mind the following when using the
remote control:
Make sure that there are no obstacles
between the remote control and the infra-
red sensor window on the unit.
• The maximum operable ranges from the
unit are as follows.
- Line of sight: approx. 23 feet (7m)
- Either side of center:
approx. 16 feet (5m) within 30°
- Above:
approx. 16 feet (5m) within 15°
- Below:
approx.
10 feet (3m) within 30°
Remote Control
Note:
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
If you turn off this unit, [OPEN/CLOSE A] on the
remote control is not available.
Be sure to use [OPEN/CLOSE A] or
[STOP/EJECT C A] on the unit.
DVD mode VCR mode
123
456
789
0
+10
• To select chapter or title
directly.
• To select track or file directly.
• To search forward/backward
through a disc.
• To begin slow forward/reverse
playback in the pause mode.
• To search forward/backward
through a disc.
• To forward/backward a tape.
• To begin slow forward
playback in the pause mode.
A-B
• To repeat between your chosen
point of A and B.
• To repeat between your
chosen point of A and B. (CD)
ANGLE
• To select camera angles on a
disc.
AUDIO
• To select audio languages on a
disc.
• To select “STEREO”, “L-ch” or
“R-ch”. (CD)
CLEAR/
C. RESET
• To clear the markers.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To clear the markers. (CD)
• To remove status number in
program input.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat. (CD)
• To exit the VCR menu.
• To reset the tape counter.
DISPLAY
• To display the current disc
mode.
• To display the current disc
mode.
• To display the current time,
tape counter, and L1 or L2.
DVD
• To select DVD output mode.
• To activate DVD mode.
• To select the DVD output mode.
• To activate DVD mode.
ENTER
• To move the cursor and deter-
mine its position.
• To move the cursor and deter-
mine its position.
• To select an item on
the VCR menu.
• To advance to the
next VCR menu.
• To go back one step
during clock and
timer programming.
INPUT
SELECT
• To select input “L1” or “L2”.
MENU
• To call up the disc menu on a
disc.
• To call up the file list. (MP3)
MODE
• To set black level on/off.
• To set virtual surround on/off.
• To arrange the playing order or
play randomly.
• To set virtual surround on/off.
OPEN/CLOSE
• To open or close the disc tray. • To open or close the disc tray.
• To eject the cassette tape from
the cassette compartment.
PAUSE
• To pause disc playback.
• To advance playback one frame
at a time.
• To pause disc playback.
• To pause tape playback or
recording.
• To advance playback one frame
at a time.
PLAY
• To begin disc playback. • To begin disc playback. • To begin tape playback.
POWER
• To turn the unit on/off. • To turn the unit on/off. • To turn the unit on/off.
REC/OTR
• To start recording or one-touch
timer recording (OTR).
REPEAT
• To play back a chapter or title
repeatedly.
• To play back a track or disc
repeatedly. (CD)
• To play back a file, folder or
disc repeatedly. (MP3)
• To select the repeat mode on/
off.
RETURN
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
SEARCH
MODE
• To search chapter, title or time.
• To set or search the markers.
• To search track.
• To search time. (CD)
• To set or search the markers. (CD)
• To call up the index or time
search menu.
SETUP
• To call up the DVD menu. • To call up the DVD menu. • To call up the VCR menu.
SKIP
• To skip chapters or titles. • To skip tracks or files.
SPEED
• To select the recording speed.
STOP
• To stop playback. • To stop playback. To stop playback or recording.
SUBTITLE
• To select subtitles on a disc.
TOP MENU
• To call up the top menu on a
disc.
• To return to the top file of the
highest hierarchy in the pro-
gram and file list. (MP3)
TRACKING TRACKING
• To adjust the tracking manually
during playback.
T-SET
• To put the VCR into standby
mode for a timer recording.
VCR
• To select the VCR output mode.
• To activate VCR mode.
ZOOM
• To magnify part of a picture.
(2x/4x)
Button
(Alphabetical order)
Media
2
3
1