Filter
Top Products
Calibur DSR-1000eZ 4-8 0150-0238A
o Main Menu → Display Settings → Record/Playback Speed
To display the Record/Playback Speed, near the upper right hand corner of the primary
monitor, select On.
OFF
ON
Use the Jog to select On or Off.
Press the Enter button to confirm the selection and exit the menu.
--OR—
Press the Menu button to exit the menu without making changes.
4.6 Main Menu → Archive Setup
Selective archive
Restore from archive
Background archive
Archive Overwrite Mode
Erase Archive Medium
Use this menu to:
• Select data to be archived and begin archiving process.
• Restore data from archive device.
• Enable background archiving.
• Specify how the unit will handle overwrite issues when the
archive medium becomes full.
• Erase the archived data.
o Main Menu → Archive Setup → Selective Archive
The Selective Archive feature allows the user to archive recorded data from the hard disk onto a CD,
DAT, AIT, RAID, or DVSe. See the Archiving Addendum for details about using archive devices.
The Archive Search Filters menu allows the user to search the hard disk for recorded events, such as
an alarm condition, or a previous recording session, then select events to be archived for later viewing.
For example, each time Record mode is activated, it is considered a separate recording session.
Archive Search Filters
Start
DATE: 12/25/00 [ ]
(MM/DD/YY)
Stop
01/01/01 [ ]
(MM/DD/YY)
Start
TIME: 11:11:21 [ ]
Stop
12:34:34 [ ]
1 2 3 4 5 6 7 8
CAMERA: [ ][ ][ ][ ][ ][ ][ ][ ]
ALARM: [ ]
Use this menu to specify:
• The Start and Stop date of
the search.
• The Start and Stop time of
the search.
• Which cameras to search
exclusively.
• To search for recorded
alarms.
[CANCEL] [START SEARCH]
Searching for All Recorded Events
Using the Shuttle to navigate, highlight [START SEARCH], then press the Enter button. The Archive
Search Results window will appear. For information about selecting a recorded event, see Selecting
from the Archive Search Results, in this section.