Filter
Top Products
2
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE EXTENDER FOR HDMI 1.3 OVER ONE CAT6
• The Extender for HDMI 1.3 over one CAT6 was designed for use with high
quality CAT-6a (augmented) cabling. This unit will either not perform to
specif cation or refuse to operate completely if cabling other than CAT-6a is
used.
• When f eld terminating CAT-6a cabling please adhere to the TIA/EIA-568-B
specif cation. Please see page 9 for more information.
• The Extender for HDMI 1.3 over one CAT6 has a maximum distance
rating based on the bandwidth (i.e. resolution and color) of the video being
transmitted. The following specif cations are based on high quality CAT-6a
cabling.
• 200 feet (60 meters) at 1080p/60Hz with up to 10-bit color depth and
with all HDMI 1.2/1.3 audio formats.
• 150 feet (50 meters) at 1080p/60Hz with up to 10-bit color depth and
with all HDMI 1.3 audio formats.
• 66 feet (20 meters) at 1080p/60Hz with up to 12-bit color depth and all
HDMI 1.3 audio formats.
• The Extender for HDMI 1.3 over one CAT6 is HDMI 1.3 and HDMI 1.2
compliant.
• This product features HDCP pass-through.
• By default, Deep Color support is disabled. To enable Deep Color support
please see the DIP switch conf guration guide on page 9. Please note that
once Deep Color is enabled, distance performance will be limited to 150 feet
(50 meters) with premium CAT-6a cabling.