Filter
Top Products
5
SENDER UNIT DESCRIPTIONS
1 Power Indicator
This two-color LED will turn bright red once the included 5V DC locking power
supply has been properly connected to the unit and the locking power supply
has been connected to an available wall outlet. This LED will turn bright green
once the Sender unit and Receiver unit are communicating correctly.
2 Calibration Indicator
This LED will alternate from red to green during the calibration procedure. The
LED will turn solid green once the calibration procedure has been completed.
3 IR Blaster Port
Connect an IR Blaster cable (Gefen part # EXT-2IREMIT) to this port.
4 Locking HDMI Input Port
Connect a Hi-Def source to this HDMI port.
5 RS-232 Input Port
Connect the controlling device to this port.
6 Fiber Optic Connector (SC-Type)
This connector accepts 1 strand of SC-terminated fi ber optic cable that will link
the Sender Unit and Receiver Unit together. The Gefen Extender for HDMI 1.3
Over One Fiber with IR will only accept multi-mode fi ber optic cabling.
7 5V DC Locking Power Connector
Connect the included 5V DC Locking Power Supply to this receptacle.