Filter
Top Products
TUNER AND CHANNEL LIST 29
Tuner Band
4 - Tuner & Channel List
Broadcast television comes
into your home in one of two
ways: over the air via antenna,
or through a cable via a local
CATV (Community Antenna
Television) provider or Satel-
lite. The Tuner Band setting
allows you to specify which
source you are using. Use this
setting only if Auto Setup
detected the incorrect band,
i.e. channels are coming in on
the wrong channel numbers.
1
2
3
Open “Setup Menu”
Press and hold the Menu button for 3 seconds.
Select “Tuner & Channel List”
Press 3.
Set “Tuner Band “
Press the right arrow repeatedly to switch the
Tuner Band among:
• Auto — Automatically detects Tuner Band.
• Antenna — Indicates that you are using an
indoor or outdoor VHF/UHF antenna.
• Cable — Indicates that you are using CATV
(Community Antenna Television), i.e. cable
TV.
SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/ = Move = Sel MENU=Quit
➔
➔
➔
➔
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit
➔
➔
➔
➔
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit
➔
➔
➔
Auto
Antenna
Cable
➔