Filter
Top Products
INSTALLATION
32 PNEG-1521 Commercial Direct Gear Drive Bin Sweep Auger
A. Join the Sweep Wheel Housing Bracket and the
Mounting Bracket with Anchor Loop together with
two (2) 3/8" x 1-½” Grade 8 bolts, four (4) flat
washers, and two (2) Nylock nuts.
12. SWEEP WHEEL INSTALLATION
B. Attach the assembly to the final Back Shield with
two (2) 3/8" x 1-½” Grade 8 bolts, four (4) flat
washers, and two (2) Nylock nuts.
Sweep Wheel
Housing Bracket
3/8” Nylock
Nuts
Mounting Bracket with
Anchor Loop
3/8” x 1-1/2”
Grade 8 Bolts
3/8” Nylock Nuts
Final Back Shield
Bracket Assembly
3/8” x 1/2”
Grade 8 Bolts
FIG.12-A
Flat Washers
Flat Washers
FIG.12-B
Flat washers