Filter
Top Products
SAFETY
7PNEG-1521 Commercial Direct Gear Drive Bin Sweep Auger
FOLLOW SAFETY INSTRUCTIONS
Carefully read all safety messages in this manual
and on your machine safety signs. Keep signs in
good condition. Replace missing or damaged
safety signs. Be sure new equipment
components and repair parts include the current
safety signs. Replacement safety signs are
available from the manufacturer.
Learn how to operate the machine and how to
use controls properly. Do not let anyone operate
without instruction.
Keep your machinery in proper working
condition. Unauthorized modifications to the
machine may impair the function and/or safety
and affect machine life.
If you do not understand any part of this manual
and need assistance, contact your dealer.
Read and Understand Manual.
INSTALL & OPERATE ELECTRICAL
EQUIPMENT PROPERLY
To avoid serious injury or death, stay away from
unit and make sure everyone is clear of all augers
before starting or operating the unit.
Electrical controls should be installed by a
qualified electrician and must meet the standards
set by the national electrical code and all local and
state codes.
Disconnect and lock out all power sources
before installing wires/cables or servicing
equipment .
Do not operate electric motor equipped units until
motors are properly grounded.
Disconnect power on electrical driven units before
resetting motor overloads.
Do not repetitively stop and start the drive in order
to free a plugged condition. Jogging the drive in
this type of condition can damage the equipment.
Electric Shock Hazard.