Filter
Top Products
ANT IN
COMPONENT IN
Pr/Cr Pb/Cb Y L-AUDIO-R
SCART2 SCART1
External Equipment Connection
- To avoid picture noise (interference), leave an adequate distance between the VCR
And TV.
VCR connection
NOTE: All cables shown are not included with the TV.
1. Connect the SCART cables from
the VCR's output jacks to the TV`s
input jacks, as shown in the figure.
2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the VCR
owner`s manual.)
3. Select the input source
by the TV/AV button
on the remote control.
S-VIDEO
Choose Your Connection
There are several ways to connect your television, depending on the components you
want to connect and the quality of the signal you want to achieve. The following are
examples of some ways to connect your TV.
Choose the connection which is best for you.