HANNspree DT12-10U1 Flat Panel Television User Manual


  Open as PDF
of 1
 
DT12-10U1 9.6" Liquid Crystal Display TV
MAD-001154
Quick Start Guide
Front ViewFront View
Rear ViewRear View
Copyright 2004, Hannspree California, Inc. All rights reserved.
Making Connections
Connecting to Antenna/Cable TV
Connecting the Power Adapter
1. Connect one end of the VHF/UHF
(Antenna) or CATV cable to ANT Jack
(VHF/UHF IN Jack) on the back of the TV.
2. Connect the other end of the VHF/UHF
(Antenna) or CATV cable to the Antenna
or CATV socket.
1. Connect the power cord to the power
adapter as illustrated.
2. Plug the power adapter connector into
the DC-IN input jack on the rear panel
of the TV.
3. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
Note : For information on connecting your
TV to a computer, refer to the user's
manual.
A/V and Channel Setup
Auto Channel Setup
Auto Program
TV
Setting
Auto Program
ONON OFF
AM
+
-
CH
4-IN-1 A/V jack
Video game console
B
R
W
Y
1.The illustratration
presented here
shows you how to
connect your TV
to a VCR, VCD, DVD
player or video game
console.
2.The cables are
color-coded(black,
red,white, yellow).
Connect each
color-coded cable to
the appropriate
connector on your
device.
B R W
Y
AV connectors
S-Video
connector
VCR
DVD
VCD
4-IN-1 A/V cable
Connecting to a VCR, VCD, DVD Player, or Video Game Console
Watching Broadcast or Cable TV
Selecting A/V Sources
1. After you have made the appopriate power and
source connections, press the power button to
turn on your television.
2. Press the TV button to select TV.
6. Press the button to select TV/CA TV.
3. Press the MENU button on the
control panel to enter the OSD menu.
4. Press the button to select the TV setting.
5. Press the MENU button.
1. Make sure your TV is turned on and a
device such as a DVD player is connected.
2. Press the TV button on the
control panel to select different source signals.
TV/CATV channel number, AV1 or AV2 appear
on the screen.
1. Press the MENU button to enter the OSD menu.
2. Use the channel buttons on the control panel to select the "TV Setting" menu.
3. Press the MENU button to enter the TV Setting menu.
4. Press channel buttons to select Auto Program.
5. Press the MENU button to enter the Auto Program Setting submenu.
6. Press channel buttons to select ON or OFF and press the MENU button.
7. Your television will begin automatically memorizing the available channels.
This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.
Remote IR sensor
Volume
adjust
Channel
select