Filter
Top Products
7 98
1 65432
OSD
Auto Scan
Manual Store
Name
Sort
Select
Exit
Channel
MENU
JT02-37E1 37" Liquid Crystal Display TV
Front ViewFront View
JT2002310621P
This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.
© Copyright 2006 Hannspree, Inc. All rights reserved.
1. Volume down button
2. Volume up button
3. OSD Menu button
4. Channel down button
5. Channel up button
6. Enter button
7. Power button
8. Infrared receiver
9. Power LED indicator
1. Connect one end of the UHF/VHF (Antenna)
or CATV cable to the TV IN jack (UHF/VHF IN
jack) on the back of the TV.
2. Connect the other end of the UHF/VHF
(Antenna) or the CATV cable to the Antenna
or CATV socket.
The illustrations below show you how to connect your TV to a VCR, VCD or a DVD player.
Making Connections
Connecting the Power Cord
1. Plug the power connector into the
AC-IN input jack on the rear cover of
the TV-set.
2. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
3. Turn the main power switch on to
supply power to the TV.
With RCA AV cable With S-Video cable
With YPbPr cable With SCART1
1. Make sure your TV is turned on and a device
such as a DVD player is connected.
2. Press the SOURCE button on the remote
control and use the t / u button to select
the required input source between TV, AV,
SV, HD, SCART1, SCART2, SCART2-SV,
D-SUB, and HDMI.
3. Press enter to confirm your selection.
Follow the instructions below to automatically preset the channels for your TV
before watching it for the first time.
1. Press the "MENU" button on your remote control or the control panel.
2. Use the p / q button to select Channel Menu.
3. Press the t / u button to start Auto Scan.
Getting Started
Auto Channel Scan
Selecting Input Source
Rear ViewRear View
1. AC power switch
2. AC power input
3. HDMI input terminal (19 pin)
4. D-Sub signal input (15 pin)
5. Audio Input for VGA
6.
Headphone jack
7. YPbPr/ HD component video input
8. Composite video input
9.
Audio input for YPbPr/ HD components (L/R)
10.
Audio input for AV or S-Video components (L/R)
11. S-Video input
12. Audio output (L/R)
13. SCART1 input
14. SCART2 / SCART2-SV input
15. RF antenna / Cable TV input
Note: After performing Auto Scan, you need not do it again when turning
on your TV next time.
Auto Scan
SV
D-SUB SCART1
HD
AV
SCART2
TV
SCART2-SV
HDMI
Quick Start Guide
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Connecting to Antenna/Cable TV
Connecting to VCR, VCD or DVD Player