Filter
Top Products
5-23
Status Listings
OSA Warnings
5062 desc = “ADC Triggered Sweep Too Fast”
help = “A sweep was taken with one of the ADC trigger modes enabled. The
sweep rate was too fast to allow trace data to be acquired for every
wavelength. To resolve this problem increase sweep time or increase the
frequency the external trigger input signal.”
5063 desc = “Key disabled during applications”
help = “The key you pressed is not active while an application is running. Exiting
the application should re-enable the key.”
5064 desc = “Invalid measurement file”
help = “An attempt was made to recall a measurement file which is contains
invalid or corrupt data.”
5065 desc = “Error detected in DSP sub-system”
help = “ The Digital Signal Processor has reported an unexpected error. Please
record the hexadecimal number listed with the error and cycle power. If the error
persists, contact the HP support center nearest your location.”
6700 desc = “Math expression input parameter undefined.”
help = “A math expression could not be evaluated because one or more input
arguments are undefined. Please check the spelling of all input arguments.”
6701 desc = “Math expression input parameter has error.”
help = “A math expression could not be evaluated because an error is present on
one or more of the input arguments. The error must be cleared before the
expression can be evaluated.”
6702 desc = “Math expression parameter has zero length.”
help = “A math expression could not be evaluated because one or more input
arguments has a zero length. This is often caused when the subset of a trace
contains no points such as when advanced line marker functions are turned on
and the line markers are too close together. It can also be caused when peak/pit
searches find no peaks or pits.”
6720 desc = “Math expression input parameter has error.”
help = “A math expression could not be evaluated because of improper input
arguments. This could be due to one or more input arguments having the wrong
type or size or because one or more inputs are not defined.”
6721 desc = “Internal error in marker search”
help => “A marker search function has failed due to an internal software
problem. Please try the operation again. If the error persists, contact the HP
support center nearest your location.”
Table 5-6. OSA Warnings (7 of 11)
Error Number Error Description [description/explanation/examples]
book.book Page 23 Monday, January 31, 2000 10:34 AM