HP (Hewlett-Packard) 86140A TV Cables User Manual


 
5-28
Status Listings
Application-Specific Warnings
Application-Specific Warnings
Table 5-7. Application-Specific Warnings (1 of 6)
Error Number Error Description [description/explanation/examples]
8001 desc = Incorrect application type is listed in spec file.
help = The application expects the first non-comment line of the specification
file to contain the APPLICATION keyword followed by the application type.
Either the APPLICATION keyword was missing or the wrong application type
was specified for this particular application.
8002 desc = A keyword cannot be used as a variable name.
help = The application has a list of keywords reserved for specification file use.
These reserved words cannot be used as a name for one of the measurement
parameters.
8003 desc = The variable name has already been used.
help = The application allows new names to be assigned to measurement
parameters. Once assigned these names can only be used as inputs to other
measurements. Only the first ten characters are significant. The line number
indicates where the problem was found. The word in the parentheses is the
variable name causing the problem.
8004 desc = Wrong number of input parameters.
help = The wrong number of inputs were found for a specification file
command. The line number listed is where the problem was found in the
specification file. The first number in parentheses is the number of inputs found
and the second number is the number of inputs required.
8005 desc = An input parameter has the wrong units.
help = One of the input parameters to the specification file has the wrong units
specified. The line number listed is where the problem was found in the
specification file. The first units listed in the parentheses was the units used by
the parameter and the second units is the units required by the parameter. An
empty pair of quotes ‘’ indicates unitless.
book.book Page 28 Monday, January 31, 2000 10:34 AM