Filter
Top Products
3-44
Using the Optical Spectrum Analyzer
The System Menus
Active Function Area Assist
When this function is
ON
, the function set in the Active Function Area is auto-
matically set to the first, or top, softkey function. For example, when you
press the front-panel
Bandwidth/Sweep
key, the Active Function Area Assist
function will set the Active Function Area to resolution bandwidth. This
means you can immediately enter the desired resolution bandwidth. There is
no need to press the
Res BW
softkey.
To set up a printer
1
Press the front-panel
System
key.
2
Press the
Printer Setup....
softkey. The Printer Setup panel appears.
The Printer Setup panel
Setup panel
selections
Printer Location
Selects either the internal printer or an external printer as the print destina-
tion.
To perform a power calibration
1
Press the front-panel
System
key.
2
Press the
Calibration....
softkey.
3
Press the
Power Cal Setup....
softkey. The Power Calibration Setup panel appears.
The Power Calibration setup panel
book.book Page 44 Monday, January 31, 2000 10:34 AM