Honeywell gsmv TV Cables User Manual


  Open as PDF
of 2
 
800-07760 10/10 Rev. A
Connecting LYNX Series Controls to the GSMX, GSMV or
7845GSMR Communications Device
For Online Support visit: http://www.security.honeywell.com/hsc/resources/MyWebTech/
Refer to the GSMX and LYNX PLUS, LYNXR-2 or LYNXR-I Installation Instructions for additional information
and procedures. If you are installing the Communications Device with a LYNX PLUS control, ensure that the
LYNXGSMEXTCB Cable Assembly
is properly routed. If used, interconnecting wiring between the cable and
the communications device must not exceed 20ft in length.
Connecting the GSMX
1. Splice the stripped end of two LYNXGSMEXTCB Cable Assemblies (P/N 600-00151) to each other as shown in
Figure 1 and Table 1.
It is essential that the wires are spliced exactly as shown on Figure 1. If used, interconnecting wiring between
the two LYNXGSMEXTCB Cable Assemblies
must not exceed 20ft in length.
2. Connect one end of the spliced LYNXGSMEXTCB Cable Assembly (P/N 600-00151) to the receptacle on GSMX as
shown in Figure 1.
3. Connect the other end of the spliced LYNXGSMEXTCB Cable Assembly (P/N 600-00151) to the communications
port on the LYNX PLUS, LYNXR-I or LYNXR-2 as shown in Figure 1. For the LYNX PLUS, ensure that the cable
is properly routed as shown on Figure 2.
Table 1 - Cable Assembly LYNXGSMEXTCB Splice Configuration
LYNX Series GSMX
Yellow Green
Red Black
Black Red
Green Yellow
BLACK
GREEN
RED
YELLOW
BLACK
GREEN
RED
YELLOW
SPLICE
1110
LYNX PLUS
Power Line
Carrier
Connector
Battery
Connectors
GSM/GSML
Port
Standard
RED
GREEN
YELLOW
BLACK
RED
GREEN
YELLOW
BLACK
CABLE ASSEMBLY
LYNXGSMEXTCB
(P/N 600-00151)
CABLE ASSEMBLY
LYNXGSMEXTCB
(P/N 600-00151)
Super Hi
LYNXGSMEXTCB-001-V0
GSMX
SALCLASSIC
Test
Button
LYNXR-I /
LYNXR-2
SERIES
GSM/GSML
Port
2 3 41
OR
CABLE ASSEMBLY
LYNXGSMEXTCB
(P/N 600-00151)
Figure 1. GSMX Connections