Filter
Top Products
GBGB28
To view the detailed information about a programme on
Schedule & Information window:
1. Select a programme you want, using the CH+/CH- buttons in
Schedule & Information window.
2. Press numerical button 1 to select more information operation
directly. Or move the cursor to the Operation window using the
buttons.
3. Select More Info using the buttons and press the OK
button.
To reserve a programme you want:
1. Select a programme you want to reserve by using the CH+/CH-
buttons in Schedule & Information window.
2. Press numerical button 2 to select reserve operation directly.
Or move the cursor to the Operation window, using the
buttons.
3. Select Reserve using the buttons and press the OK button.
A Reserve Mode window will be displayed.
4. Select a mode among Weekly, daily and once.
5. Move the cursor to the Operation window using the buttons.
Then, select View Reserve or Record Reserve. Or you can
directly select View or Record on the Operation window using
numeric 1 or 2 button.
View Reserve is indicated by the alphabet ‘V’ and Record
Reserve is indicated by the alphabet ‘R’.
Available number of programmes to be reserved is up to 20 by
summing up view/record. If the number exceeds, a warning
message will appear.
If a reservation has been already set within the range of a
reserved time, no reservation will be made and a message of
Already Reserved will be displayed.
• View Reserve: View-reserve a programme.
When your STB is in standby at the fixed start time:
The STB switches the current channel to the channel of an
appropriate service. The STB returns to standby at the end time.
When your STB operates at the fixed start time:
The STB switches the current channel to the channel of a
reserved service. The STB keeps the current channel at the
end time.
PVR-8000 ENG 1/21/03 11:10 PM Page 33